1 / 3
Embroidery Floss / Friendship Bracelet Thread Organizer — zdjęcie 1
1 / 3

Embroidery Floss / Friendship Bracelet Thread Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Embroidery bobbin storage box with added slots for the bobbins

Ocena
5 / 5
Polubienia
43
Pobrania
169
Wydruki
1
Wyświetlenia
777
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This Storage box holds up to 100 bobbins. (The bobbins are the flat card type. which can be printed from the provided model.) The box also has compartments for a small pair of sewing scissors and the included winding tool, which can be clipped onto the edge of the box in two places to hold it steady while you wind.

The lid of the box is hinged, so you'll need three M3 screws to use as hingepins. The lid holds itself open at a comfortable angle of 105° and easily snaps shut with two print-in-place compliant latches.

Layer heights of up to 0.4mm and 15% infill are suitable and no supports are needed. I've tested with PLA but any material should work equally well. STEP file is included for easy modification if needed.

Tagi