No-mess oil filter wrench/socket for Fram filter PH9688
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oil filter socket wrench + funnel combo for catching the mess when unscrewing the oil filter and preventing oily elbows.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 829
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench.
The main purpose of this tool is to keep the oil that remains above the filter from running down your arm when you unscrew it. If your car doesn't do that, then you're lucky and you won't need this thing.
This fits the 15 sided 7.55cm diameter Fram PH9688 oil filter.
This filter is used in many makes and models of cars including my 2008 Kia Rondo.
You can print the test ring to make sure the size and fit is correct before printing the entire funnel.