HOVERAair X1 Cassette Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light weight minimal hinged case
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
HoverAir X1 is suppose to be light weight and easy to use. So I decided to make one with a hinge so you won't loose any pieces and be able to deploy the HOVERAir X1 fast. The walls are about 1-2mm thin. I mean the drone can take a hit, but this adds a little more protection and rigidity in a hard case. Mainly to protect the fans from snag and the camera lens. If the case breaks, it's easy enough to 3D print another one. It's only about 62.48g of total filament. I mainly have this in my small sling bag.
I may work on another case with 2 batteries and possibly with the 2 battery charger too with similar concept. I have used the case for a week and it's been great.