IKEA DUKTIG Play Kitchen Pump Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for DUKTIG Play kitchen with an electric pump
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v2.0
My wife got an IKEA DUKTIG Play kitchen from our buy nothing group, https://www.ikea.com/us/en/p/duktig-play-kitchen-birch-60319972/
And wanted to adapt it to be a “real sink” so we bought one of these https://a.co/d/01rTgaw
The fake faucet only had 2 through holes and was held by small self-threading screws, and the pump was going to look ugly. So I decided to make a design I could print by inserting in to the bottom of the pump and be held by friction, and have a screwless mount for the through holes, while being able to fish the pump tube through, without kinking it.
Sharing the OpenSCAD design in case you want to use a different pump, hopefully the comments help you figure out how to change it.