Screwiverse Insert and Screw for Standard Honeycomb Storage Wall (HSW) Fasteners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified Screwiverse insert and screw that fit the standard HSW fasteners flush.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 817
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Screwiverse but sized for native HSW fasteners!
I loved the idea of Screwiverse, but being unable to use the massive library of existing HSW fasteners without an adapter was less than optimal. I expanded the opening in the insert and the screw to accommodate the standard fastener hex.
Obviously, these will not work directly with other Screwiverse parts, but does bring the magic of Screwiverse to the existing library of HSW accessories.
The walls are thin, but they work fine (design is supported by the fastener hex once installed). Use a smaller nozzle (0.4mm or 0.2mm) to be sure the walls don't end up with large gaps.