Earbud-Wrap with Fast Release
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked this earbud holder because of the quick release feature: the last loop with the audio jack holds the other…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 96
- Wydruki
- 2
- Wyświetlenia
- 471
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
I liked this earbud holder because of the quick release feature: the last loop with the audio jack holds the other loops in place. Release it, and you can release all the other loops instantly.
I redid the original as a commented, editable .scad file. I added two central holes so you can thread the cord through them to keep it handy while you are listening.
earbudcard.scad is the source of the .stl and what I actually printed.
earbudBusinessCard.scad is redrawn to be the actual size of a standard business card. Since it works in various sizes, it's the one you should use for your customizations.
Be sure to check out ALittleSlow's remix
Print instructions
Category: Mobile Phone Print Settings
Printer: Monoprice Mini select
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Notes:
I used top and bottom of 0.8mm PLA at 200°. But this is not a fussy print.
Bed heat 60°. I use painter's tape and glue stick on my bed.