1 / 4
Wind-in Toilet Roll Keeper (Print-in-place) — zdjęcie 1
1 / 4

Wind-in Toilet Roll Keeper (Print-in-place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keeps your toilet roll ready for when you're caught short! Holds 5m of two-ply toilet roll, keeping it dry and clean.

Ocena
4,727 / 5
Polubienia
316
Pobrania
746
Wydruki
9
Wyświetlenia
3422
Oceny
11

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Keeps your toilet roll clean for when you need it. Whether hiking, camping or just to keep in a bag in emergencies, always have your favourite paper ready to go!

Just feed in your choice of paper (up to 10cm wide) and then twist top to reel it in- aim to keep tension for most capacity! I estimate it can hold around 5m of twin-ply paper!

Designed to stand upright and print in place. I printed in PLA but PETG is probably better if more durability is desired. Sometimes needs a little freeing up by twisting knob on top but also twist the inside part too to avoid snapping. Printed 0.30mm draft layer height profile with 10% gyroid infill (increase perimeters for maximum durability). I printed using a 0.4mm nozzle.

Tagi