1 / 3
Frieren - Himmel's Sword
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Himmel's sword I modeled after some reference photos from the anime.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Tried to make it 1:1 as well as I could, including the size. It turned out Himmel must have had giant hands, so the handle is a bit dialed back, so you can actually hold it.
Additional materials you gonna need:
- 100cm long 12mm outer diameter aluminum rod,
- superglue, preferably the gel type,
- (optional) 3mm locator pins.
- M5 screw, 30/40mm long
The blue stone I've casted in resin, then glued to the model, but it could be printed and painted as well.
How I made it:
- Print all the parts in sensible orientation
- PETG worked well
- Some supports will be needed
- Sanded them using 80, 320 grid + some sanding sponges
- Glue it together
- Start by gluing the tip to the aluminium rod
- Then slide the next part and glue to previous
- Repeat
- If you don't glue down the handle, 11_screw_adapater will need to be glued inside the aluminum rod
- Coat it all in UV curable resin (the same one that's used in resin 3d printers) and sand it down to make it really smooth
- Paint :)
You can make the crystal glow!
In the handle/guard there is space for two AAA batteries and in the guard there's some space to put blue LEDs.