1 / 8
Gas Mask 40mm NATO Inlet "Defense" and "Swirl" — zdjęcie 1
1 / 8

Gas Mask 40mm NATO Inlet "Defense" and "Swirl"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Decorative inlet cover for 40mm NATO gas masks, designed with the MSA Millennium in mind. Updated Defense.

Ocena
5 / 5
Polubienia
44
Pobrania
231
Wydruki
2
Wyświetlenia
1311
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The look of the MSA Millennium gas mask is lovely, but I don't like the empty ports on the side. I don't need big expensive filters or bulky replica ones, so I made these inlet covers for the aesthetic.

Both designed to print without supports, with a 0.6mm nozzle. I believe I made them so a 0.4mm nozzle will also work well. Print the “swirl can" ones with threads pointing up, and the “conic dome” threads on the build plate. The “swirl can” design has 2 parts for a CW and CCW inlet flow for aesthetic.

No supports
0.2mm layer height
Very forgiving

This and more also available fully printed and shipped:
https://order.jan-asleep.com
 
UPDATE:
I modified the Defense to include a version that's bayonet-style for the MSA Advantage. Untested, but should be okay. Prints with only support in the center inside, or very good bridging. Should work with 0.6 and 0.4mm nozzles.

Tagi