IEM tip case - Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric case to store IEM tips with print in place hinges and snap lock.
- Ocena
- 4,4 / 5
- Polubienia
- 93
- Pobrania
- 878
- Wydruki
- 5
- Wyświetlenia
- 3029
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is designed to be sleek, customizable and easy to print.
It should fit most tips with a stem opening between 4-7mm without issue.
Features
Set the number of rows and columns (the minimum size is 3 columns by 2 rows)
Set the offset of the pins (this also drives the radius of the corners)
Adjust the size of the hinge
Adjust the tolerance
Print settings
Suggested filament: PETG, but any other will suffice.
This case requires no special print settings or supports, but there are some guidelines.
3 perimeters
Single perimeter on top and bottom layer
Outer perimeter first
Infill angle 0° or 90°
Infill amount 0% - 20%
The hinge may stick a bit at first. Just try to gently force it loose.
When in doubt print the smallest box as a test.
The included examples will fit most printers, including the Mini.
Notes
If you just want the box, disable the pegs in the timeline (it's two features).
The photo includes a few prototypes. The second photo is the final model.
Changelog
v1.1 - Some small tweaks
v1.2 - New peg design. Tips with a very small stem opening might be a bit harder to put on.
v1.3 - Fixed a small bug when changing the spacing (changed the Distance to -cols * ( space / 2 ) on Plane1)