Wall Art Mount Clip for the Lama SA315B Helicopter wall art.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this to screw mount the Helicopter wall art to the wall.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
A screw fixing for the Lama SA315B Helicopter wall art. The art is held 4mm from the wall for extra dramatic effect.
Link to the helicopter wall art:
https://www.printables.com/model/716473-lama-sa-315b-helicopter-wallart
I used two small countersunk screws with a 3mm shaft and a small yellow rawl plug to attach the fixing to the wall. The helicopter just presses into the grove in the clip, so can be easily removed if required. I added a third clip (not screwed) on the landing gear as a spacer to keep it at an even distance from the wall. I printed mine in white PET-G it is almost invisible on my magnolia wall.
The retaining grove is 3.048mm wide and 3mm deep so may fit other wall art.