1 / 3
6mm PTFE Tube Mod for Prusa XL — zdjęcie 1
1 / 3

6mm PTFE Tube Mod for Prusa XL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimize friction to ease feeding and stress on the nextruder by upping PTFE from 4mm OD to 6mm OD

Ocena
4,667 / 5
Polubienia
72
Pobrania
144
Wydruki
7
Wyświetlenia
2824
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Minimize friction to ease feeding and stress on the nextruder by upping PTFE from 4mm OD to 6mm OD.

Since I like to use my XL with RepBoxTT underneath to feed spools having less friction on the longer runs is critical and thats why I did this mod.

Requires switching stock 4mm Festo connector with a PC6-M5 connector similar to the ones found here: https://www.amazon.com/gp/product/B0BPXPBB8X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

PTFE Adapters / Couplers shown are available here: https://www.printables.com/model/943853-ptfe-couplers

 

 

Tagi