1 / 3
Transition Relay Carbon Cable Grommets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Transition Relay Carbon eBike did not have grommets for the rear brake hose or the dropper. These are they
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
My Transition Relay Carbon GX AXS eMTB did not come with grommets for where the rear brake hose or the dropper cable routed into the head tube, causing some rattling. I decided to fix that. There was a blank plug that I removed to copy the dimensions, then drew these up in Fusion 360.
I printed these on my K1 using TPU and 0.08 layer height and super slow. Best is to lay the flat face on the bed; No supports were needed. The TPU was a bit stringy so there was some cleanup