Minions Stuart in a Thong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stuart from the minions in his red thong.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Standard Digital File License
It's Stuart! From the Minions! In a Thong! On your keychain even…
One side is Stuart's front, and flip it over for his backside :0
You can print this with 4 colors but I wanted to get creative and use 6.
I was able to get 6 colors on my 4 material AMS on the A1, should be able to do the same on the MMU also. The .m3f has all the colors setup and pauses at layer 16 and 21.
I started with yellow, blue, black, and red.
At the pause on layer 16, I changed the blue for a white filament, then resumed.
At the pause on layer 21, I swapped White back to Blue, then also swapped Yellow to Grey.
EDIT: I included a STEP file if you get an error in PrusaSlicer with the 3MF, but you'll have to color it yourself. One STEP has a hole the other doesn't and will need a negative modifier.
Want one but can't print it for yourself? Check out my Etsy!