Section Risers for Joseph Joseph Segmented Utensil Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reuse Joseph Joseph Utensil pot as Cutlery tray/pot by adding these segment bits to rise the floor underneath.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
I'm using this utensil pot as cutlery pot instead, while it's doable for knifes and kind of ok for forks and tb spoons it's way too deep for tea spoons and kids cutlery.
So hello little risers.
It's very simple and quick print (taller ones took 20min each and little ones - 12min on one of my machines)
Print in VASE MODE at 0.3mm layer height with 2-4 bottom layers, I did my ones in PETG but any filament should work.
If you want to modify height and/or do 3x back ones too, search onshape as it's public document.