Spiral Titan3D Rocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spiralized version of my rocket logo
- Ocena
- 4,333 / 5
- Polubienia
- 82
- Pobrania
- 881
- Wydruki
- 3
- Wyświetlenia
- 2207
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have been having so much fun with the spiral twist fidgets recently, I thought I should design my own. Then I thought, I should make my logo (a rocket and profile icon) into the fidget. I was not disappointed. This thig is so fun.
To Print:
Well dialed and calibrated printer. The tolerances are tight with a near interference fit.
Recommended layer height is 0.1-0.2
infill can be any amount
Walls/Perimeters should be 2+
Bonus imaginary points if you can use 2 different materials with vastly different shrink rates and have it still slide together easily. (Pictured is Burnt Titanium PETG and Red ASA).