Crivit bike smartphone holder clip adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension clip for 'Crivit' pouch and/or smartphone holder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The included mounting clip of this 'Crivit' pouch and/or smartphone holder was not optimal for the steer of my wife's road bike. The pouch, if mounted in the middle on the handlebar, would be too far forward due to the rear attachment being quite far up. Therefore, I made this adaptor clip for it. The clip itself has also been made available as an STL file for use in your own projects.
An O-ring with an inner diameter of 22 mm and a thickness of 2.5 mm can be used on the clip in a groove.
I've cut the object on 22.5mm height and glued both parts together with super glue afterwards.