1 / 3
Fischer FMP30 Isoscope Wire Spool and Holder — zdjęcie 1
1 / 3

Fischer FMP30 Isoscope Wire Spool and Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For use with Fischer FMP30, keeps your probe wire tangle free.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial

Keep your work area neat and get rid of at least one tangled wire! Designed for the FMP30 Isoscope by Fischer Technologies, this spool wraps up your wires and holds a probe on the front side.

Also, there is a small section on the 13mm probe holder that will most definitely snap off immediately, but it will hold the probe snug.

Tagi