Print in Place Tensegrity Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy (and, let's be honest, completely useless) Tensegrity Table.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you print this, please post a make, leave a like, and comment. I would love to see someone else print this, and, get some feedback maybe.
I made this on a whim because I wanted to.
It's a really easy print, only needing a little support on the “arms” and not on the strings, and can hold a Kilogram of filament.
It is meant to be printed at a .2 layer height. The middle string is thicker because that is where the actual load is being supported. I have filleted the edges of each string to:
- Eliminate the “weak links” where the strings attach to the base and top.
- Allow for easier printing.
- Allow a higher load capacity.
I have included the Prusaslicer settings I used to print this. You do need to activate supports and change the z distance to .4mm.
This model is without a tensioner, as I currently don't know how I would design that.
You cannot sell this.
Good luck to all downloaders out there, and happy printing.