1 / 3
Velbon-style Quick Release Base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera gear quick release system inspired by the 42mm Velbon one.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
Works well with official Velbon baseplates as well as some 3D-printed ones (I use this one). It's very sturdy, even without the spring with just friction. I still wouldn't trust it with anything very heavy. Use at your own risk!
Assembly is very simple. Squeeze the M5 nut to the hexagonal hole on the bottom with pliers. And apply the heated insert to the other hole on the bottom with a soldering iron.
Parts list:
- M5x16mm countersunk screw
- M5 nut
- 3/8" threaded insert
- Spring (Couldn't find a good one online. the one in the picture is from an official Velbon tripod. However it's not strictly necessary to have one as the latch is held closed even with just friction.