Primal Rights CPS parts holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts Holder for Primal Rights CPS shuttles, primer punches and a LEE shellholder set
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a parts holder for my Primal Rights CPS.
It holds both shuttles, both primer punches and one LEE shellholder set in its original case.
The mounting points are designed for countersunk screws with heads no larger than 8mm in diameter and 1.7-2mm in height. The shaft needs to be ≤3mm.
This way, the head pulls the holder to the wall.
I printed it in Extrudr PLA NX2 (matte PLA+) and it works very nicely, no need for tougher materials.
Print it standing on the backside (mounting-side) on the buildplate.
My settings: 0.4mm nozzle, 0.2mm layers, 4 walls, infill: adaptive cubic 15%, 10mm raft, i suggest to use standard supports on the build plate only just for the mounting holes