Spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My design of Frame holders for spools for Prusa MK3/MK4.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
I made Frame holders for 4-5 pieces of spools with bearing rollers on pipes/bars. Fix on frame by longer M3 screws into the original holes in the frame. I tested it on my Prusa MK4, for MK3 I based it on the model only, not tested so you can try it and give me report thanks :)
You need:
2 pieces of pipe or bar/pipes with diameter 10mm and length 375mm of each.
Bearings 6000 (with inner diameter 10mm and outside 26mm) for rollers
4 pieces of M3 screws with ideal length 25mm + nuts + washers
Advice about tracking of filament:
You can change shape of original filament guide (See image)
Maybe, I will make some better guide for this solution in the future.