1 / 3
Propeller Plane — zdjęcie 1
1 / 3

Propeller Plane

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A plane that can spin its propellers when wind is blown from the back or the front.

Ocena
0 / 5
Polubienia
10
Pobrania
42
Wydruki
0
Wyświetlenia
785
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted a little decoration for the exhaust fan from some laser cutters so I designed this little plane inside of fusion. This is not a wind vane and not meant to turn to show the direction of the wind. All pieces should be snap fit however I would recommend gluing the pieces in if it will see considerable gust(especially the back pieces which will not stay in). 

To make the propeller spin, I used the bearing linked below which is inserted into the box hub.

https://www.printables.com/en/model/874638-print-in-place-6200-ball-bearing 

I designed a small holder for the plan in which I stuck an 0.85in plastic pipe to hold it up. There is also a version of the plane fuselage where the pipe can directly be stuck into the plane fuselage itself if you so wish. 

Tagi