PTT: Printable TurnTable- The Spool Holder for ALL Spools Big and Small
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One spool holder to rule them all! The turntable is quick and easy for spools from 250g up to 10Kg and beyond!
- Ocena
- 5 / 5
- Polubienia
- 13
- Wydruki
- 1
- Wyświetlenia
- 832
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
The Printable TurnTable (or Pooch Turn Table for the most egotistical of us) is the 3D Printable open frame version of the RepBox TT drawer I released a while back. The entire thing is printable save for the following BOM
- 5pc 7mm diameter ball bearings
- 1pc 3mm square nut
- 1pc M3x25mm socket cap screw for adjusting the drag on the table
- Optional: Length of PTFE guide tube
The whole thing is modular and adjustable to acommodate spools of all sizes with different hub dimensions.
IMHO this is THE best solution for larger spools too. I've tested it with spools up to 10Kg and I imagine it could handle larger as well. The key to overcoming large inertial mass with big spools is to LAY THEM DOWN. This model allows you to do so.
If you need an adapter or coupler to route your PTFE tube I've got a free variant here: https://www.printables.com/model/943853-ptfe-couplers
and a quick access mag coupler version for my club supporters here: https://www.printables.com/model/941312-magnetic-twist-lock-ptfe-couplers-joiners-adapters
For anyone who needs the non printable parts please consider supporting us by purchasing them here: https://www.repkord.com/products/ptt-printable-turntable-non-printable-parts-set