Door Hinge Jig with clamp downs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3.5 inch Door hinge router guide with added wings for clamps
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 300
- Wydruki
- 1
- Wyświetlenia
- 1440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I took the original model from gpace08 and modified it slightly. First iteration I made 9.5mm (3/8") taller for the router bits I had. The next iteration I added wings to the sides. this served 2 purposes, the first was to have a larger surface area for double sided tape (in my case I used blue tape + super glue). The second was they were sized appropriately to allow for a micro jig style dovetail clamp (or track saw clamp).
I printed vertically with tree supports. .2mm standard 15% infill (defaults on my p1s, with support). Regular supports took 5 minutes less but used more filament.