Backflow Prevention Valve for ±0 Cordless Cleaner Y010 Vacuum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed flexible valve for ±0 Cordless Cleaner Y010 to fix dust leak; print using TPU.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
After years of use, my ±0 Cordless Cleaner Y010 began releasing dust from its inlet. Upon inspection, I discovered that a flexible valve (as shown in the image below) had permanently deformed, compromising the seal of the dust container.
To resolve this, I removed the faulty part, measured its dimensions, and created a 3D model to replicate it.
The valve needs to flex open when the vacuum is on to allow dust to pass through, and then return to its original shape to close the seal when the vacuum is off. To achieve the necessary material properties, I 3D printed the model using the following settings:
- Filament: ColorFabb VarioShore TPU
- Temperature: 190°C
- Extrusion Multiplier: 1.1 (110%)
This model is specifically designed for the ±0 Cordless Cleaner Y010, making it a useful solution for anyone experiencing similar issues with this particular vacuum.