Raspberry PI Zero 2W enclosure with 3010 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple enclosure for the Raspberry PI Zero and Zero 2W with 3010 fan
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A simple enclosure for the PI Zero 2W with lots of ventilation plus a 3010 fan for cooling.
Assembly
Additional Parts
- 4x M3 brass inserts
- 4x M3 screws
To assemble the device, begin by inserting the brass inserts into the designated holes in the base. Once done, place the Pi Zero board securely into the base. Break the single-layer bridge within the screw holes on the top cover, then insert the brass inserts into the holes on the top, which will hold the 3010 fan in place. Secure the fan to the top using M3 screws. Afterward, position the top cover over the button and fasten it by screwing in the screws. Finally, connect the fan to the 5V and ground pins on the Pi, using the special holes on the GPIO pins.