Magwell Rear Modified for XL Trigger Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick revision that allows the magwell to work with XL trigger guards like the Strike Industries Cobra Trigger Guard
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy mod for those running XL trigger guards. The part has been shortened so that it is tight around the factory magwell. The center has been removed and the edges revised so that it fits snugly into place without wiggling. Note: The “Original Length” file has the same mods but has not been shortened. Some of the lowers I tested needed the additional length for proper fitment, some required the shorter version. If you are looking to test these files print both and see which one works best on your lower. The magwell should be snug with no front/rear movement.
Printed with 3 walls
25-50% Gyroid Infill
Smoothed layers in Bambu Studio
Tree supports on build plate, removed support from center of hole
PLA, PLA-CF, PETG-CF etc…