Compact Accessories Box for X1C/P1S/P1P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an even more compact box remix for X1C/P1S/P1P accessories.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 215
- Wydruki
- 7
- Wyświetlenia
- 1536
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE, Oct. 6, 2024:
I designed an additional version of the box, which can encompass an attached fan. The outer dimensions and the lid remained unchanged, so that you just need to re-print the box, if needed.
I added two new profiles with 0.16mm and 0.20mm, which contain the lid and the spacer, too.
Thanks for your valuable feedback and contribution for improvement!
Reason:
From your feedback I found out, that BL ships fully assembled hotends WITH the fan already ATTACHED.
When I ordered my fully assembled hotend the fan came NOT attached, but was packed separately. Thus, I designed the box without the fan attached, but only with the heater assembly, without knowing better. Sorry for any inconvenience.
UPDATE , Sept. 22, 2024:
Hi all,
I fixed the .3mf print profile so that lid is now sliced correctly again with the logo on the top. Apparently something has been changed in Bambu Studio which resulted in the logo not being printed.
Now everything is corrected now.
Sorry for any inconvenience!
-------------------------------------------------
I like the design and and how the box is divided for the various items, but for my use it lacked of not fitting into my drawer inset and not taking full hotend assemblies.
So I remodelled it to my needs. Thanks and credits to marcopolo for the original design.