1 / 9
Penrose kite and dart covered jigsaw with braids — zdjęcie 1
1 / 9

Penrose kite and dart covered jigsaw with braids

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Same as https://www.printables.com/model/832714-penrose-kite-and-dart-covered-jigsaw with braids

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
0
Wyświetlenia
150
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I started with the tiles in https://www.printables.com/model/832714-penrose-kite-and-dart-covered-jigsaw and added raised sections on each tile that make complex braids when they fit together. They are primarily decorative and do not change the tiling characteristics at all, but may inspired designs.

These Penrose kite and dart tiles fit together like jigsaw pieces. Unlike jigsaw pieces, the holes are covered above, so after fitting them together, one side shows only braids, not jigsaw connectors. It takes a little practice to rotate the pieces into place, but once connected, they hold very well and the tiling is liftable. 

I recommended printing kites and darts in a single color to keep the braid continuous, but you can experiment with different looks. The braids are raised and can also be painted a contrasting color.

For the cover photo, I switched the filament manually from white to burnt titanium (a sparkly dark blue) on a Flashforge Adventurer 3 Pro 2 to print the top layer. You can determine the time using slicing software or with a little trial and error.

Update 12-Nov-2024: I added three variations so the loops of some braids can be closed.

Update 29-Nov-2024: I added additional variations to close loops. The cover photo uses some of these.

Tagi