Lenovo Legion Go Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the use of the bottom USB C port to connect a dock
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 197
- Wydruki
- 1
- Wyświetlenia
- 2402
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find a nice dock or stand that used or allowed access to the bottom USB C port, and it looks ugly with the cable hanging out of the top of the device. For use with a USB C cable with the connector angled 90 degrees in the same orientation as the image.
I printed it in PLA+ with 15% infill, 0.16mm layer height and it came out well. Supports are needed. It's a fairly snug fit as I wanted it to be because I rarely move the device. If you will be removing the device from the stand on a regular basis, you might want to scale the model up by 1% or so in your slicer.
If you like the model, a make is appreciated.