CEE to Neutrik PowerCon True1 adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter from 16A CEE plug (the blue ones, known from campsites and construction) to the weatherproof PowerCon True1
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter from 16A CEE plug (the blue ones, known from campsites and construction) to the lovely weatherproof, rugged, reliable Powercon True1 connectors.
The design comes from an effort to have a travel-worthy charging setup for my electrical motorcycle that would also allow me to charge from the (EU-) ubiquitous blue CEE campsite plugs.
I ordered a cheap CEE plug from AliExpress like this one (affiliate link, but easy to find otherwise) - and replaced the white bit with my design to fit a powercon E1025F socket like this (again affiliate and easy to find)
The design uses the original screws from the plug (or shorter ones? not sure now) and two 3mm inserts for the powercon, set in blind sockets to keep that part of the design waterproof.
Designed from scratch, just using the measurements I got from the CEE plug and the Powercon socket.
I designed and printed both connecting sides first as thin slices for fitting and positioned those in blender at the sizing and angles I was aiming for, then used blenders bridge feature to connect them. the locking hook for the CEE socket lid and the screw-in details inside were the last additions.
Two prototypes rendered a usable third print, which I count as a success.