Multi Collet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collet holder for varies size collets. Printed in two pieces 38.1mmX241.3mmX215.9mm (431.8mm Assembled length)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I Designed this in two pieces with dovetails to connect them together. It is a tight fit! I printed this on a Bambu X1C. It holds various size collets and tools[SK6, SK16, TG100, Heat shrink collets, Pull studs, Tap collets(they do not sit flush), Hydraulic chuck collets]. The quantity of the various holes was suited to my needs. The two rectangle slots I use to hold small wrenches. I sized these holders to fit inside the side shelf of a Huot tool cart. These can be used on any flat surface. Hope you find this Collet Holder useful!
This was the inspiration for making it https://www.printables.com/model/784733-tg100-collet-holder I have printed this one out and use it at work.