Nerf SlingFire replacement lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Normal sized Slingfire lever, because the original breaks easily
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Couldn't find this model anywhere, so I took Eletric Squid's model and just made it not big. The proportions are still a bit different from the original lever, but it should be a bit more confortable for people with larger hands.
I recommend printing with all walls or with infill set to 100%. Maybe inserting a metal rod in the weak section, so it lasts longer.
-/-
Update: Printed two using Voolt PETG and both broke with normal use (no flipping nor priming one handed). The latter was printed using 100% walls, 40mm/s, 245°C and no cooling.
The third one I printed on PLA and it has been holding on nicely for a few weeks. Printed with prusament PLA .20mm quality preset for the prusa mini, only modified it to have all walls and support on the buildplate.