1 / 1
Stackable square storage box 100x100x70mm (Vase mode) — zdjęcie 1

Stackable square storage box 100x100x70mm (Vase mode)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a big stackable storage box which can be printed in Vase mode, provinging quite strong print.

Ocena
5 / 5
Polubienia
45
Pobrania
148
Wydruki
3
Wyświetlenia
520
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
  • Recommended to print in Vase mode with wall thickness of 0.8mm. 
  • Bottom layers more than 2.

If you print it with vase mode, the box can withstand quite a beating, and also it makes it smoother and less break prone when separating boxes.  For 100x100x70mm box, it is a bit wobbly, but if you combine multiple boxes, it can become more rigid. I was able to carry 2x5 boxes quite easily. 

I have not tested with scaling it down, it may cause problems with connectors binding. 

Also if you increase first layer width, it is possible to make box stack in only one way.

Tagi