Prusa mini base anti vibration feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti vibration feet for the Prusa mini base to lower noise level.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I love my Prusa mini, and with the prusa mini base it becomes even a better printer (https://www.printables.com/model/63483-prusa-mini-base). I noticed however, that the prusa mini, although a great printer, does some noise when printing at high speed, specially with the input shaper. The included rubber feet do some dampening, but is not great, that why I decided to make a custom rubber feet.
I made some audio measurements using the MINI Linear Sound Test, from @Micke_210733 (https://www.printables.com/model/141259-mini-linear-sound-test) [a remix from @Skreelink], the image shows a sound recording with and without the feet. They can reduce up to 30dB of sound at some frequencies, which is really noticeable.
I got the best result using the Filatech Filaflex40, with 40% infill. Print them with the ball looking up without supports.
Print Settings
Printer Brand:
Prusa
Printer:
MINI+
Yes
Supports:
No
0.2mm
Infill:
40%
Category: 3D Printer Accessories