1 / 1
Volvo V70 1st gen AC probe cover (no support needed). — zdjęcie 1

Volvo V70 1st gen AC probe cover (no support needed).

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover for AC probe in Volvo V70 1st gen. (Not perfectly alligned, but it works as a charm).

Ocena
0 / 5
Polubienia
3
Pobrania
46
Wydruki
0
Wyświetlenia
371
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Hi everyone!
Recently my friend asked me to print him AC probe cover for his Volvo V70, so this is what I came out with.
It isn't perfectly alligned, so you need to use some assertive force to push it into place.
If I had more time for this small project, I would make the outern curve better fit with the panel, but at that time I had only a pair of calipers and 15 minutes. However as you see on the photo it gets the job done.

Print settings:
-Infill 100%
-I used brim as a good messure, but do what you want, it's optional
-Just use a regular profile for your filament of choice

Printed with Prusament Lipstick Red PLA.

I hope someone will find it helpful ;)

Tagi