.308 Ammo Clips with Box and Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the genious Ammo Clip from @MrW3D_37548 with Labels and stacking Box
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 343
- Wydruki
- 5
- Wyświetlenia
- 1781
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used a Bambu Lab for the text. I added the labels with and without borders for multicolor printing. It prints perfectly in PLA with a 0.2mm layer height and without support, as long as the labels are positioned on top. The box also prints without support—just trust in the bridging capabilities.
The labels will snap in, but I superglued them to be sure. I used a generous amount of thin superglue, applied with a brush.
I polished the springs with a rotary tool (Dremel) using a plastic brush, which made things 1000x smoother and perfect. See the video for details.
I used my Bambulab A1 Mini with AMS and couldn’t be happier. Thanks to @MrW3D_37548.
Check out this video for more details: https://youtube.com/shorts/_XooXFJ_Fv4