Kobalt TS10601 table saw dado insert plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I tried using a few examples online, but they did not fit the TS10601. So, I created this plate. Update 10/09/24: update
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Dado stack insert plate for an 8" dado stack on a kobalt TS10601 jobsite table saw. I believe the TS10602 is the same. You must modify the riving knife in order to use this plate and a dado stack on this particular saw by disassembling the riving knife assembly and cutting off the bottom of the blade so that it can be removed when using dado stack blades and reinstalled after, without going thru another disassembly.
Need to insert 4 - 5mm threaded inserts into the 4 holes along with 4 grub screws to level the plate.
I used PETG on a 400 x 400 bedslinger. need atleast 350mm for the long direction.
On 10/09/24 I added a dado insert plate in 2 parts that should fit on a 220 x 220 build plate.
I haven't printed it so you are the beta tester. ;0}