Seeed Studio XIAO nRF52840 Case with Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and secure case for the Seeed Studio XIAO nRF52840, featuring detentes to help keep the lid attached.
- Ocena
- 4,25 / 5
- Polubienia
- 19
- Pobrania
- 515
- Wydruki
- 4
- Wyświetlenia
- 3160
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple enclosure I created for the Seeed Studio XIAO nRF52840 Sense with a hole for a male USB-C connector. Even though it was designed for the XIAO nRF52840 Sense, it should also work with the standard BLE version as their physical specs appear to be identical.
This model features indentations at the top of the case base that mate with small extra extrusions on the lid to keep it securely closed during light to normal usage. The XIAO nRF52840 should fit snugly inside without it taking too much force to properly seat it. Once seated, the XIAO should not rattle or move around even when inserting a USB-C cable in, or removing one from, its inbuilt port.
The case printed super well on my Bambu Lab P1S without supports after using OrcaSlicer to generate the G-code. My printer used around 0.71 m (2.11 g) of filament and completed the job in a bit over 20 minutes.
Please post your makes and provide feedback, it really helps me out as I continue to learn CAD.
Print settings:
- Filament: FLASHFORGE PLA Filament - Upgraded Nebula Purple
- Layer height: 0.1mm
- First layer height: 0.1mm
- Infill density: 100%
- Infill pattern: cross hatch
- Other settings:
- Adaptive layer height:
- Quality / Speed: 0.5
- Adaptive layer height:
Attribution:
Thank you to @FyrbyAdditive for their excellent model of the dev board! I was able to get 95% of my modeling done before I even had the electronics in my hands thanks them.