1 / 2
Cat vs Alien selfie hueforge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cat selfie
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 265
- Wydruki
- 6
- Wyświetlenia
- 997
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (0)Kolekcje (89)Powiązane
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 130.42x180mm in size
The Max Depth is 2.2mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.3
PLA Anycubic dark grey Transmission Distance: 3.2
PLA Anycubic light grey Transmission Distance: 3.2
PLA Kexcelled white Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to dark grey
At layer #13 (1.12mm) swap to light grey
At layer #19 (1.6mm) swap to white for the rest.