1 / 1
Tiffin Window Latch piece (2013 Tiffin Bus is what I have) Recommend using PC or PETG.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the internal portion of the latch. The original is designed to fail. I've increased the size of the rod.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3mf file made in Fushion 360. I made the size per the original piece. I found that on my machine, I had to size it in Bambulabs to 98% to get it correct. I suggest PC, but PLA may work just fine.
Edit: I exported it as an STL for those that can't use the 3mf file.
