1 / 4
Cbutters Bantam eGPU Enclosure now with Oculink
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an eGPU enclosure that lets you make a very tiny eGPU build using the TH3P4GaN V2 New! Oculink
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 2375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
This is an eGPU enclosure that lets you get a NVIDIA class egpu in a very small package.
Two versions:
- Bantam (For SFF NVIDIA Workstation Cards)
- Bantam Long (For Gigabyte 4060 LP)
Other Parts you will need to source:
- TH3P4GaN V2 - USB4 Version (OCUP4GAN - Oculink Version)
- An AC Adapter (170W recommended for Bantam, 230W recommended for Bantam Long)
- 4-6 M3 Screws for lid attachment to base
Printing:
- DO NOT USE PLA as it may warp or melt.
- Use at least PETG
- When I print, I print the base with the first 10mm in TPU, then switch to a carbon fiber PETG for the rest of the print. The lid is also printed in TPU.
- I also use at least 3 walls for best adhesion on a multi-material print.
- Printed Correctly, you get a soft edge, with a rigid frame that makes it durable and rugged.
Assembly Guide:
You can buy High Quality, TPU/ CF-PETG printed parts of this design from me directly at: surfacefan.myshopify.com