Toguard Dash Cam Camera Retaining Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A retaining clip for the sideways slide mount that the camera uses to connect to its suction cup mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A retaining clip for the sideways slide mount that the camera uses to connect to its suction cup mount. After a while, the slide mount starts to get loose and the camera will slide out all the time and especially when turning. This clip fixes that problem. It also helps with the camera shaking. I printed it in PETG with 1mm perimeters (sides, top & bottom). The infill doesn't really matter, but I used 15%. 0.2mm layers. No supports needed. I made various versions until I found one that worked the best for me. I've included all those versions along with the SLDPRT files.