1 / 1
Roomba Ramp (incl. Fusion 360 File)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ramp for Roomba vacuums
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (16)Powiązane
I remade drdentz's roomba ramp in Fusion 360. There was a Fusion 360 file in this remix, but there was no design history as it was an import of the original SolidWorks model. I recreated the model in Fusion 360 from scratch, so it's easier to customize. You can customize some basic parameters like the width, height, and bolt size in the “Modify → Change Parameters” menu. The current settings are a 40mm height, 200mm width, and M3 bolts/nuts (the bolts need to be at least 16mm long to connect two ramps together).
