1 / 1
Slider for Mopar 3748 429, Parking brake vacuum release valve — zdjęcie 1

Slider for Mopar 3748 429, Parking brake vacuum release valve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement slider for Mopar #3748 429, Parking brake vacuum release valve, C-body 1974-1978.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally.

I have multiple valves and all of them had pin sheared off due to old plastic became brittle. The valve assembly is not meant to be serviced and NOS replacement parts seem to have the same problem. I made two versions of the slider, one with printed pin and one with hole to accept 3mm rod as a pin.

I have also experienced that the black rubber part becomes hard and leaks after decades - next step is to replicate it.

I recomment durable and heat resistant material, like Nylon, ASA. PETG may be acceptable. 0.6mm nozzle was a bit too large for a small object like this.

Tagi