The HomeCube - thicker door magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
File set to use 10 x 10 x 2 or 10 x 10 x 3 mm door magnet plates with the HomeCube
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Note: This file set is an extension to the HomeCube enclosure project. To make use of this file set, you have to download the basic file set and building instructions PDF as well.
The original HomeCube file set stipulates the use of 10 x 10 x 1 mm magnet plates as door magnets. With these alternative parts you can use 2 or 3 mm thick plates instead.
Just download the files and replace the “E1” or “B8” file from the original file set with the one you plan to use. E1 is used with the Prusa I3 Mk3 integration (Caution: Not for Mk4!) file set, B8 is used with the non-printer-specific universal fileset ("additional universal parts").