1 / 4
8bitdo gamepad thumbstick
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw-in thumbstick replacement for 8bitdo gamepads.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 121
- Wydruki
- 4
- Wyświetlenia
- 794
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 4) (Komentarze: 6)Remiksy (0)Kolekcje (20)Powiązane
Thumbstick Replacement for 8Bitdo Gamepads
Tested with SN30PRO, SF30PRO, and SN30PRO+.
Features:
- Hat Options: Available in 4 shapes and 3 sizes. The short hat closely matches the original thumbstick length. All hat lengths can fit the short base, while the medium base provides extra length for medium and tall hats. For the best experience, use a medium base with any of the tall hats.
- Customization: The hats are limited by the case's hole size, so it's possible to combine the base and hat in the slicer to create a solid model for added durability.
- Design: The thumbstick base is designed with minimal clearance from the gamepad casing. If there's any scratching, push the thumbstick down firmly to ensure a proper fit.
Additional Information:
- Source Files: STEP & Solvespace sources are provided with dimensions for the short base and hats.
Printing Details:
- Material: PLA or PETG
- Nozzle: 0.45mm
- Base preset: 0.15mm QUALITY
- Infill: 100%
- Supports: Snug style with paint-on supports at 44 degrees
- Variable Layer Height: Quality/Speed ratio at 0.15
- Horizontal Shells: Top and bottom solid layers set to 1, minimum shell thickness to 0
- Top Fill Pattern: Concentric