Bangle.js 2 watch strap adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strap adapter for the bangle.js 2 watch in the case one of the strap holders broke.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 91
- Wydruki
- 2
- Wyświetlenia
- 435
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this model cause one of the holders for the wristband broke and none of my repairs worked long term. I got the inspiration form the bangle.js forum here https://forum.espruino.com/comments/17450040/ . In comparison to this, with my model you can easily press the button with the case on.
I printed it on my Anycubic i3 mega S at 0.2mm layer height without supports. Print it upside down so the top side is on the print bed, then you don't need supports. The model is made with a 0.2mm print tolerance which can also be adjusted in onshape. I can also provide it with other tolerances, but those will not be tested.
Onshape link to CAD model (needs account sadly): https://cad.onshape.com/documents/bddb67d299b611073c9e3ed5/w/9747c4e7c027b4d0df1870bd/e/97fcc93f456ca88f3db4e271?configuration=List_oksb4gbQRvC4vf%3DDefault&renderMode=0&rightPanel=variableTablePanel&uiState=66d45e46e547c8490532b8e8