Container for Paint cones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Container to hold about 108 print cones.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a bunch of paint cones for a project, so I printed 3 batches of 35 cones each.
This is the model I printed: Print cones by ertrandL_1014579
After printing them, I realized that handling and storing this many cones wasn't all that easy, so I decided to design this convenient container box for the cones.
Each section holds up to 18 cones, but you can scale the height of the box if you need room for more.
Each section has a lever you can slide up to get to the cones at the bottom - sliding the lever up when inserting the cones after use makes it easier to load them in properly.
The container uses about three times as much filament as the cones themselves, so it's somewhat expensive compared to the cones themselves :-)
Should work in any material - I printed them in Gold PETG.
Prins without any supports when positioned right side up on the build plate - sorry about not orientating the models that way in the files, but it's easily done in the slicer.